HomePharmaClean Room and Operating TheaterCleanroom Products

Cleanroom Products

Steel Air Shower

Through the photoelectric sensor switch to achieve two interlocking, automatic opening and closing, for other s to facilitateaccess. Spray to implement automatic control

Model: KLC-AS-1590-P1
External size(w*d*h):1590*1000*2180 mm
Internal size(w*d*h): 790*930*1910  mm
Net power:1.6 kw
Persons for cycle:1-2 person
Model: KLC-AS-1590-P2
External size(w*d*h):1590*2000*2180 mm
Internal size(w*d*h):790*1930*1910mm
Net power:3.1 kw
Persons for cycle:2-4 person

Hanging Clean Laminar Flow Hood

Laminar flow hood is availale for local high cleanliness of the air purification unit. Can be flexibly placed in the cleanliness of the process requiring high point of the top order to comply with local process that needs a high cleanliness of the environmental requirements. Hoisting clean laminar flow hood can be a single use, can also be composed of several connected ribbon clean area. Clean laminar flow hood and civil engineering-type or asembly-100 clean room, compared with the investment, launched quickly, with low plant and construction requirements. Ease of installation, operation and low cost.

Clean laminar flow hood is the air to a certain degree of air pressure through the HEPA filter in place, so that clean air was the form of vertical one-way flow of air into the work area, thereby ensuring the working area to achieve technical requirements of cleanliness.

Sample Lean Car

The product is applied to pharmaceutical preparations (except for sterile preparation) sampled raw and auxiliary material. According to GMP standards, the company car to 10000 sample cleanliness, while the use of electric components, in line with GB1497-85 (electrical safety standards); comply with GB-191 (pckaging standards) requirements.

Clean sample where cars moved to require sampling, fixed sampling vihicle (brading); connected to the power, turn the power switch, open the fan switch; fans strart working, will be transferred to the apropriate voltage (typically 220V), to be clean sample car running 15 minutes later, into the sample bucket; sample after the removal of sampling barrels, turn off the fans and power supply, unplug the power cord, will move to the optional location of sampling vehicles.

Clean Bench

Model: KLC-LC-1
External size(w*d*h): 960x780x1580mm
Working zone(w*d*h): 940x600x650mm
Cabinet material: Cold Rolled Plate
Table-board: SUS304(T=1.0mm)
Model: KLC-LC-3
External size(w*d*h):1590x900x1580mm
Working zone(w*d*h):1470x600x650mm
Cabinet material: Cold Rolled Plate
Table-board: SUS304(T=1.0mm)

Hand Drier

Air Filter

Modular Air Conditioning Unit

Transfer Box